天天舔天天爽_视频日韩_成人网线_天天草草草_免费一级在线观看_色综合色综合色综合色综合

IS626-12/13/14/15/16-GH-P1-E1-S1 Dwyer德威爾 防爆壓力變送器

IS626系列本安型防爆壓力變送器可以把壓力轉換為標準4-20 mA信號輸出，使用316/316L不銹鋼材質，可以精確的測量兼容性的氣體和液體。擁有0.25%的高精確，NEMA 4X（IP66）不銹鋼防護可使本產品應用于工業環境中。IS626具有高抗震性，并有3＂電纜和M-12型4針連接可選。

IS626系列通過了UL認證可以適用于危險場合，具有本安型防護。

The Dwyer SERIES IS626 Intrinsically Safe Pressure Transmitter can be used to

accurately measure compatible gases and liquids compatible with its 316/316L

stainless steel wetted parts. Series IS626 full-scale accuracy is 0.25%. Designed for

industrial environments with a NEMA 4X (IP66) housing, this transmitter resists most

effects of shock and vibration. Models are available with a 3′ cable or M-12 4 pin

connection.

The IS626 is UL listed for use in Hazardous (Classified) Locations. The protection

method is by Intrinsic Safety, “ia”. It was investigated by UL under UL Standard 913

Sixth Edition and CSA Standard No. 157-92.

IS626-12/13/14/15/16-GH-P1-E1-S1 Dwyer德威爾 防爆壓力變送器

Service: Compatible gases and liquids.

Wetted Materials: Type 316, 316L SS.

Accuracy: 0.25% FS; absolute range: 0.5% FS (includes linearity, hysteresis, and repeatability).

Temperature Limit: 0 to 176°F (-18 to 80°C).

Compensated Temperature Range: 0 to 176°F (-18 to 80°C).

Thermal Effect: ±0.02% FS/°F (includes zero and span).

Pressure Limits: See Catalog page.

Power Requirements: 10 to 28 VDC.

Output Signal: 4 to 20 mA.

Response Time: 50 ms.

Loop Resistance: 0 - 900 Ω maximum.

Current Consumption: 38 mA (maximum).

Electrical Connections: 3 ft. cable or 4-pin M-12 Connector.

Process Connection: 1/4" male/female NPT and BSPT.

Enclosure Rating: NEMA 4X (IP66).

Mounting Orientation: Mount in any position.

Weight: 8.9 oz (252 g).

Agency Approvals: CE, cULus Intrinsically Safe to UL Standard 913.

For use in Hazardous (Classified) Locations:

Class I Div. 1 Groups A,B,C,D; Class II Div. 1 Groups E,F,G; Class III Div. 1.

Temperature Code: T4 @ 80°C ambient.

Install in accordance with control drawing 01-700797-00.

WARNING: To prevent ignition of flammable or combustible atmospheres, disconnect power before servicing. Use with approved safety barriers using entity evaluation.

IS626-12/13/14/15/16-GH-P1-E1-S1 Dwyer德威爾 防爆壓力變送器

IS626系列本安型防爆壓力變送器可以把壓力轉換為標準4-20 mA信號輸出，使用316/316L不銹鋼材質，可以精確的測量兼容性的氣體和液體。擁有0.25%的高精確，NEMA 4X（IP66）不銹鋼防護可使本產品應用于工業環境中。IS626具有高抗震性，并有3＂電纜和M-12型4針連接可選。

IS626系列通過了UL認證可以適用于危險場合，具有本安型防護。

技術指標

介質：兼容氣體和液體

材質：316，316L 不銹鋼

精度：滿刻度的±0.25%（包括線性，滯后和重復性）

溫度范圍：0 至176°F（-18 至80°C）

溫度補償范圍：0 至176°F（-18 至80°C）

溫度影響：±0.02% FS/°F（包括零點和量程）

壓力范圍：見表

電源：10 至28 VDC

輸出信號：4 至20 mA 

響應時間：50 msec

回路電阻：***大0 - 1300 ohms

電流消耗：***大38 mA

電氣連接：3＂電纜或4針 M-12連接

工藝連接：1/4? MNPT內螺紋或FNPT外螺紋 和 BSPT

防護等***： NEMA 4X (IP66)

安裝定位：任意

重量：8.9 oz (252 g)

機構認證：CE,UL和cUL本安